APC APC Smart-UPS Rack mountable RC 1000VA 230V
SRV1KL-IN Features
Supplies utility power to the connected loads in the event of a UPS power overload or fault.
Automatically starts up the connected equipment upon the return of utility power.
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Provides temporary battery power when the utility power is out.
Small UPS footprint provides maximum usage of valuable electrical room floorspace
Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.
Allows you to recharge your battery while on generator power.
Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
Minimizes installation costs by enabling the use of smaller generators and cabling.
Microprocessor controlled, 3-stage regulated charging ensures the fastest recharge times without decreasing battery life.
Provides key UPS status at a glance. Multiple status indicators with load and battery bar graphs.
Protects the initial investment in the UPS when migrating from tower to rack-mount environment.
Use any Home Automation network to monitor and control the S20 through its RS-232 serial port. For information on how to communicate with the S20, see APC’s Application Note #102. Crestron and AMX installers should visit their respective websites for information on how to integrate the S20 into those networks.
Eliminates humming and heat generated when powering tube lights and fans
Customize UPS capabilities with management cards.
Saves your battery power for when you really need it – during power cuts!
Audible alarms
Disconnected battery notification
Predicitive failure notification
Automatic self-test
User-replaceable batteries
Rack/Tower convertible
Flash upgradeable firmware
Plug-and-Play external batteries
LED status indicators
Serial connectivity
InfraStruXure Manager Compatible
SmartSlot
Network manageable
Intelligent battery management
Temperature-compensated battery charging
Automatic internal bypass
Scalable runtime
Hot-swappable batteries
Automatic restart of loads after UPS shutdown
Generator compatible
Cold-start capable
Resettable circuit breaker
Input power factor correction
Power conditioning
Frequency and voltage regulation
Safety-agency approved
Avoids costly power problems by keeping your IT equipment and data protected and available.
Peace of mind that comes with full equipment compatibility and reliability of a leader
Save time with easy and convenient remote/network accessibility.
Low operating and maintenance costs with proven reliability and intelligent battery management.
Output power capacity
Max Configurable Power (Watts)
Nominal Output Voltage
Efficiency at Full Load
Output Frequency (sync to mains)
Output Frequency (not synced)
Other Output Voltages
Load Crest Factor
Topology
Waveform type
Output Connections
Bypass
Nominal Input Voltage
Input frequency
Input Connections
Cord Length
Input voltage adjustable range for mains operation
Number of Power Cords
Efficiency at Full Load
Maximum Input Current
Input Power Factor at Full Load
Battery type
Typical recharge time
Nominal Battery Voltage
Expected Battery Life (years)
Extendable Run Time
Efficiency in Battery Operation
Runtime
Interface Port(s)
Control panel
Audible Alarm
Available SmartSlot™ Interface Quantity
Surge energy rating
Maximum Height
Maximum Width
Maximum Depth
Net Weight
Shipping weight
Shipping Height
Shipping Width
Shipping Depth
Color
Operating Temperature
Operating Relative Humidity
Operating Elevation
Storage Temperature
Storage Relative Humidity
Storage Elevation
Audible noise at 1 meter from surface of unit
Standard warranty
Max Bypass Input Current
Weight | 13.5 kg |
---|---|
Dimensions | 8.8 × 38 × 43.8 cm |
Brand | APC |
Model No. | SRV1KL-IN |
Builtin battery type | 12V / 5AH |
1 | 3 |
Backup Time | Upto 15 Mins. |
Topology | Online UPS |
Waveform Type | Sine wave |
Capacity | 800Watts / 1.0kVA |
Input frequency | 50/60 Hz /- 3 Hz (auto sensing) |
Nominal Input Voltage | 230V |
Interface Port(s) | DB-9 RS-232, RJ-45 10/100/1000 Base-T, Smart-Slot, Optional : SNMP Card ( SNMP Slot Provided) |
Nominal Output Voltage | 230V |
In Box Accessories | Computer Interface Cable, Input Power Cable, Manual, Power Chute Software, UPS, Warranty Card |
Warranty | 2 Years Onsite Warranty |
Product link in APC website |
linknet –
Good quality, decent delivery & fair price!